.32 S&W cartridge and .32 S&W Long and .32 ACP
网页2018年10月26日 — The .32 S&W Long cartridge is derived from the .32 S&W, by increasing the overall brass case length, to hold more powder. Since the .32 S&W headspaces on the rim and shares the rim dimensions and case and bullet diameters of the longer .32 S&W Long, .32 S&W cartridges may be fired in arms chambered for these longer cartridges.
The .32 S&W Long as a man-stopper - Cast Boolits
网页2010年12月28日 — The .32 French is so like the .32 S&W Long that cases for it can be made by nothing more than turning the rim off and making an extractor groove. The French military has a LOT of combat experience!! In fact, very similar rounds were almost standard military issue throughout Europe up to and including WWII.
32 S&W long loads with Trail boss - Cast Boolits
网页2019年8月14日 — My best results with 32 S&W long were with 2.5 grains of Trail Boss and 78 grain lead round nose bullet. I tried Hp-38, Tite Group, and Universal. All powders except the Trail Boss had unburnt powder residue. The Trail Boss also had the best grouping. I like shooting these rounds. 32 S&W and 32 S&W long. Hope this helps.
Any experience with .32 S&W Long in Henry .327 Federal Magnum
网页2020年7月2日 — While it cycles 32 s&w long fine, I doubt it would work well with 32 acp. The Henry big boy steel carbine is a great rifle. Mine comes in at a trim 6 pounds 8 ounces empty, decent 4 1/2 pound trigger, and was reliable out of the box.
.32 S&W and .32 S&W Long in Colts? - Smith And Wesson Forums
网页2021年1月2日 — This gun was chambered in the .32 New Police, which is dimensionally identical to a flat-nose version of the .32 S&W Long, except for the nose shape. In addition to the .32 New Police cartridge, the revolver was available in 32 Colt.
.32 S&W Long loads? - Cast Boolits
网页2009年10月31日 — My standard load for the 32 S&W Long is the 311008 with 2.8 grains of ZIP. My favorite load previously was 2.8 grains of 231 but substituting ZIP cut the group sizes by approximately 50% in all six test guns. Either of these loads works very well behind the 98 grain rnfp RCBS. Hope this helps. Neil
Does anyone carry 32 S&W long? - Smith And Wesson Forums
网页2014年6月10日 — I don't own or have any experience with the .32 S&W Long, but this is the only hollow point ammo I could find for it: Magtech Sport Ammo 32 S&W Long 98 Grain Semi-Jacketed Hollow Point Everything else is probably going to be a simple round nosed bullet or wad cutter.
Red dot and 32 s& w LONG - Cast Boolits
网页2019年7月2日 — It was made and advertised to shoot 32 S&W, 32 S&WL and Colt 32 Long cartridges, thus it was "designed" for such. The Winchester factory 32 S&W factory cartridges, a load that is presumed safe to shoot in 32 S&WL chambered revolvers made for smokeless ammunition, generated 18,900 psi in actual testing.....not guessing.
S&W 32 Long CTG revolver info. | Smith And Wesson Forums
网页2012年5月18日 — On the side of the revolver that has the chamber release, it has SMITH & WESSON on the side of the barrel. At the trigger, it has the S&W emblem. On the other side, it has 32 LONG CTG on the barrel and MADE IN USA at the trigger. Under the handle, it has the number 518528.
32 S&W w/Trail Boss? - Cast Boolits
网页2010年1月5日 — OK, first is this the 32 S&W (short) or long. for the long, imr lists 1.5 to 2.9 gr trail boss with a 90gr hornaday lswc. I see no listing for the short, but the web site lists a procedure of 70% to 100% of the space below a seated boolit, see here